EverCrete Deep Clean II
| Deep Clean II is an
architectural cleaner for use in food processing facilities, warehouses,
racetracks, train stations, bus terminals, parking garages, cold storages, and
facilities where incidental food contact may occur.
Deep Clean II has been approved by the USDA for use in federally inspected food processing facilities since 1960. This Product can take out deep oil and dirt stains and will etch the surface after 30 minutes, it's for dirty, oily, cleaning! |
For Heavily Soiled Applications
$30.00/ Gallon |
Available in 55 Gallon Drums and 5 Gallon Buckets!
EverCrete Deep-Clean 1 is a fortified concrete and multi-purpose cleaner that is designed to clean and "etch" the surface simultaneously. Oils, dirt, efflorescence, and grime are removed. The primary use is to remove deeply penetrated oil stains and contaminated surface residue.
U.S.D.A. Approved
|
|
||||||
|
|
|||||||
|
|
|||||||||||||||
|
Technical Data
|
Test Sample
|
|
| Form: | Liquid | A test patch is always recommended prior to cleaning architectural surfaces. Some surface damage may result from full strength application. |
| Color: | Dark Red | |
| pH: | See MSDS Sheet | |
| Weight: | 8.8 lbs per gallon | |
| Flash Point: | None | |
| Specific Gravity: | See MSDS Sheet | |
|
Recommended Dilution
|
Packaging
|
|
|
A test patch is the best method to determine proper dilution rates. Full strength applications be damage architectural surfaces but may be required for hard to clean areas. For daily cleaning, the product may be diluted 1:1 or more with clean water. |
|
|
|
Safety |
||
| Refer to Material Safety Data Sheet regarding hazards, personal protection and product disposal. | ||